A modern vacuum cleaner designed for demanding industrial environments, such as foundries, asphalt plants, power plants, paper mills, sugar mills, and more. Suitable for both wet and dry materials.
HEIMDAL VACUUM LOADER
HEIMDAL 1.0
Modern vacuum loader with strong suction and an arm mounted on top of the tank.
A true workhorse with plenty of suction power and a load capacity of about 9–10 tons. Designed for demanding industrial environments handling both dry and wet materials.
Available on a bogie or tridem chassis.
HEIMDAL 2.0
Modern vacuum loader with strong suction and blowing capabilities, featuring an arm mounted on top of the tank.
Similar to Heimdal 1.0, but with an additional blower. The load capacity remains approximately 9 tons. Designed for harsh industrial environments handling both wet and dry materials.
Available on a bogie or tridem chassis.
HEIMDAL 3.0
Modern vacuum loader with suction, blowing, and a flexible arm on the tailgate.
Fully equipped with suction and blow functions, as well as a flexible arm on the tailgate and, if needed, a 10-bar compressor. Designed for demanding industrial environments handling both wet and dry materials.
Available on a bogie or tridem chassis.
Contact us
Call us or submit an inquiry.
Martin Dahlberg, CEO +46 76 571 88 88
Bengt Nordström, service +46 730 84 81 54
-
![Blue Heimdal vacuum loader with equipment on the side.]()
Option 1 - Flexible arm on tailgate.
-
![Open hatch with filter units in an industrial ventilation system, seen up close.]()
Easy to purge the filter chamber.
-
![Green Heimdal vacuum loader with large machinery mounted at the rear, photographed from the side with a white background.]()
Ample hose storage, 154m total.
-
![Heimdal flexible arm on tank]()
Option 2 - flexible arm placed on the tank.
-
![vacuum loader with an arm mounted on the tank.]()
The arm is designed to accommodate two 3.5m pipes.
-
![Heimdal vacuum loader remote control.]()
All necessary information is displayed on the remote control.
-
![Heimdal vacuum loader, top view.]()
Flat surfaces on top of the tank.
-
![Heimdal vacuum loader, tipping function.]()
Up to a 50-degree tipping angle, supported by either 4 or 6 vibrators.
-
![Heimdal vacuum loader control system.]()
Advanced control system with remote support (OTA) and the capability to vacuum/blow at power setting 10, 11, or 12.
-
![Heimdal 3.0L - dry vacuum cleaner on a tridem chassis]()
All of our dry vacuum trucks are available on bogie or tridem chassis.
Excellent blowing machine.
In this video, you can see our Heimdal 2.0 blowing wet gravel 8/16. The height difference was 14m upwards, and the total hose length was 85m (6"). We blew 3,500 kg of material faster than ever before. Thanks to minimal resistance for the airflow, the pump did not have to work hard, maintaining a temperature of around 40°C, meaning it stayed cool.
Remarkably high efficiency!
Megin's Heimdal 2.0 vacuum loader can transport wet gravel 14 meters vertically upward and 90 meters horizontally.
Megin's Heimdal 1.0 vacuum loader sucks up floor joist fill material.
Unparalleled suction power.
The Heimdal unit offers both vacuum and blowing capabilities across any truck gear, with exceptional airflow performance observed even at 10th gear. This is attributed to minimal air resistance throughout the entire bodywork. Low resistance also ensures that the pump operates without overheating.
Megin's Heimdal 3.0 vacuum loader with a flexible arm on the tailgate.
Flexible arm on tailgate.
Our 8-inch arm is designed for easier maneuverability. Please contact us if you would like a demonstration.
Contact us
Call us or submit an inquiry.
Martin Dahlberg, CEO +46 76 571 88 88
Bengt Nordström, Service +46 730 84 81 54